Turnoverball is the #1 selling gooseneck hitch in American. A hitch when you need it, a level bed when you don’t. It is the hitch that started it all!
- Solid, machined 2 5/16″ ball
- Durable powder-coat finish
- Only a 4″ hole in the bed
- Bolts to existing holes in the frame with no drilling or welding
- Solid, one-piece machined receiver socket
- Flexible latch pin handle attached to a spring-loaded, 5/8″ steel locking pin that goes completely through the ball
- Limited Lifetime Warranty
Have questions? Check out these FAQ’s!
Q: I want to get a spray in bed liner. Should I do it before or after I have the Turnoverball installed?
A: Either way. However, if you have the spray done after the installation, you have the advantage of the liner covering the cut edges of the hole in the bed.
Q: How often do I need to grease my Turnoverball?
A: The great thing about having a square base in a round hole is that the dirt has a place to go. How much grease is needed is a function of how much it is used and how dirty the environment. If you notice that the grease coating on your ball is gone, it’s probably time to apply more!
Q: Will the Turnoverball work with a Body Lift or Suspension Lift?
A: The Turnoverball will work with a Suspension Lift, but not a Body Lift. IN order for our hitch to work properly, the distance between the bed and the frame must be maintained. a body lift separates these components.
Q: I have a short bed truck. Will the Turnoverball work with short beds? Even 5′ 6″ beds?
A: Yes, the Turnoverball can be installed on every full-sized truck on the market. However, it is important that turning clearance is considered for every truck and trailer combination that will be used. B & W offers a 4- inch extender that plugs into the receiver socket of the Turnoverball and moves the pivot point 4 inches rearward. And! B & W offers the Extend-A-Goose Coupler which offsets your trailer 10″.